20 lb. (9 kg) commercial grade, propane tank with Safe-Fill™ connection.
	Product Code	Product Description
	MP105900	Unpainted, steel tank.

	20 lb. (9 kg) commercial grade, propane tank with Safe-Fill™ connection.
	Product Code	Product Description
	MP021701	Painted, aluminum tank.

	Level-S™ 50 Grit Vacuum Brazed Pad Uses: The most aggressive of the coating removal grinding pads. Surface Prep: Etches the floor in preparation of floor coating application. Surfaces: Concrete Only. Estimated Pad Life*: 40,000 ft2 (3720 m2)
	Product Code	Product Description
	PDGPVB130050	13" - 50 Grit Vacuum Brazed Pad
	PDGPVB160050	16" - 50 Grit Vacuum Brazed Pad
	PDGPVB170050	17" - 50 Grit Vacuum Brazed Pad
	PDGPVB200050	20" - 50 Grit Vacuum Brazed Pad
	PDGPVB210050	21" - 50 Grit Vacuum Brazed Pad

	Level-S™ 100 Grit Vacuum Brazed Pad Uses: Ideal for removal of light floor coatings such as paint and sealers. Surface Prep: Etches the floor in preparation of floor coating application. Surfaces: Concrete Only. Estimated Pad Life*: 40,000 ft2 (3720 m2)
	Product Code	Product Description
	PDGPVB130100	13" - 50 Grit Vacuum Brazed Pad
	PDGPVB160100	16" - 100 Grit Vacuum Brazed Pad
	PDGPVB170100	17" - 100 Grit Vacuum Brazed Pad
	PDGPVB200100	20" - 100 Grit Vacuum Brazed Pad
	PDGPVB210100	21" - 100 Grit Vacuum Brazed Pad

* Estimated pad life assumes ideal conditions.
  Actual pad life may vary based upon the floor condition, amount of water used, operator performance, etc.

	Level-S™ 30 Grit Grinding Pad - Semi-Metal Uses: Initial grinding of new or previously unfinished hard floors. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 65,000 ft2 (6040 m2)
	Product Code	Product Description
	PDGPSM130030	13" - 30 Grit Semi-Metal Grinding Pad
	PDGPSM160030	16" - 30 Grit Semi-Metal Grinding Pad
	PDGPSM170030	17" - 30 Grit Semi-Metal Grinding Pad
	PDGPSM200030	20" - 30 Grit Semi-Metal Grinding Pad
	PDGPSM210030	21" - 30 Grit Semi-Metal Grinding Pad

	Level-S™ 50 Grit Grinding Pad - Semi-Metal Uses: Initial or secondary grinding of new or previously unfinished hard floors. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 60,000 ft2 (5570 m2)
	Product Code	Product Description
	PDGPSM130050	13" - 50 Grit Semi-Metal Grinding Pad
	PDGPSM160050	16" - 50 Grit Semi-Metal Grinding Pad
	PDGPSM170050	17" - 50 Grit Semi-Metal Grinding Pad
	PDGPSM200050	20" - 50 Grit Semi-Metal Grinding Pad
	PDGPSM210050	21" - 50 Grit Semi-Metal Grinding Pad

	Level-S™ 100 Grit Grinding Pad - Semi-Metal Uses: Secondary or intermediate grinding of new or previously unfinished hard floors. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 55,000 ft2 (5110 m2)
	Product Code	Product Description
	PDGPSM130100	13" - 100 Grit Semi-Metal Grinding Pad
	PDGPSM160100	16" - 100 Grit Semi-Metal Grinding Pad
	PDGPSM170100	17" - 100 Grit Semi-Metal Grinding Pad
	PDGPSM200100	20" - 100 Grit Semi-Metal Grinding Pad
	PDGPSM210100	21" - 100 Grit Semi-Metal Grinding Pad

	Level-S™ 200 Grit Grinding Pad - Semi-Metal Uses: Intermediate or final grinding of new or previously unfinished hard floors. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 50,000 ft2 (4650 m2)
	Product Code	Product Description
	PDGPSM130200	13" - 200 Grit Semi-Metal Grinding Pad
	PDGPSM160200	16" - 200 Grit Semi-Metal Grinding Pad
	PDGPSM170200	17" - 200 Grit Semi-Metal Grinding Pad
	PDGPSM200200	20" - 200 Grit Semi-Metal Grinding Pad
	PDGPSM210200	21" - 200 Grit Semi-Metal Grinding Pad

	Level-S™ 400 Grit Grinding Pad - Semi-Metal Uses: Final grinding for new or previously unfinished hard floors. Initial step for restoration of previously finished hard floors. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 60,000 ft2 (5570 m2)
	Product Code	Product Description
	PDGPSM130400	13" - 400 Grit Semi-Metal Grinding Pad
	PDGPSM160400	16" - 400 Grit Semi-Metal Grinding Pad
	PDGPSM170400	17" - 400 Grit Semi-Metal Grinding Pad
	PDGPSM200400	20" - 400 Grit Semi-Metal Grinding Pad
	PDGPSM210400	21" - 400 Grit Semi-Metal Grinding Pad

Pad Reference Chart

* Estimated pad life assumes ideal conditions.
  Actual pad life may vary based upon the floor condition, amount of water used, operator performance, etc.

	Level-S™ 400 Grit Polishing Pad - Resin Uses: Initial polishing for new or previously unfinished hard floors which have gone through the grinding process. Initial or secondary pad for restoration of a previously finished hard floor. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 50,000 ft2 (4650 m2)
	Product Code	Product Description
	PDGPRE130400	13" - 400 Grit Resin Polishing Pad
	PDGPRE160400	16" - 400 Grit Resin Polishing Pad
	PDGPRE170400	17" - 400 Grit Resin Polishing Pad
	PDGPRE200400	20" - 400 Grit Resin Polishing Pad
	PDGPRE210400	21" - 400 Grit Resin Polishing Pad

	Level-S™ 800 Grit Polishing Pad - Resin Uses: Intermediate or final step for new or previously unfinished hard floors which have gone through the grinding process. Intermediate or final step for restoration of a previously finished hard floor. For maintenance applications, use on hard floors to maintain initial gloss level. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 60,000 ft2 (5570 m2)
	Product Code	Product Description
	PDGPRE130800	13" - 800 Grit Resin Polishing Pad
	PDGPRE160800	16" - 800 Grit Resin Polishing Pad
	PDGPRE170800	17" - 800 Grit Resin Polishing Pad
	PDGPRE200800	20" - 800 Grit Resin Polishing Pad
	PDGPRE210800	21" - 800 Grit Resin Polishing Pad

	Level-S™ 1800 Grit Polishing Pad - Resin Uses: Intermediate or final step for new or previously unfinished hard floors which have gone through the grinding process. Intermediate or final step for restoration of a previously finished hard floor. For maintenance applications, use on hard floors to maintain initial gloss level. Surfaces: Concrete. Estimated Pad Life*: 65,000 ft2 (6040 m2)
	Product Code	Product Description
	PDGPRE131800	13" - 1800 Grit Resin Polishing Pad
	PDGPRE161800	16" - 1800 Grit Resin Polishing Pad
	PDGPRE171800	17" - 1800 Grit Resin Polishing Pad
	PDGPRE201800	20" - 1800 Grit Resin Polishing Pad
	PDGPRE211800	21" - 1800 Grit Resin Polishing Pad

	Level-S™ 3000 Grit Polishing Pad - Resin Uses: Final step for new or previously unfinished hard floors which have gone through the grinding process. Final step for restoration of a previously finished hard floor. For maintenance applications, use on hard floors to maintain initial gloss level. Surfaces: Concrete. Estimated Pad Life*: 65,000 ft2 (6040 m2)
	Product Code	Product Description
	PDGPRE133000	13" - 3000 Grit Resin Polishing Pad
	PDGPRE163000	16" - 3000 Grit Resin Polishing Pad
	PDGPRE173000	17" - 3000 Grit Resin Polishing Pad
	PDGPRE203000	20" - 3000 Grit Resin Polishing Pad
	PDGPRE213000	21" - 3000 Grit Resin Polishing Pad

Pad Reference Chart

* Estimated pad life assumes ideal conditions.
  Actual pad life may vary based upon the floor condition, amount of water used, operator performance, etc.

	Level-S™ 400 Grit Polishing Pad - Resin Uses: Initial polishing for new or previously unfinished hard floors which have gone through the grinding process. Initial or secondary pad for restoration of a previously finished hard floor. Surfaces: Concrete, Stone, Marble, Terrazzo. Estimated Pad Life*: 50,000 ft2 (4650 m2)
	Product Code	Product Description
	PDGPRE130400	13" - 400 Grit Resin Polishing Pad
	PDGPRE160400	16" - 400 Grit Resin Polishing Pad
	PDGPRE170400	17" - 400 Grit Resin Polishing Pad
	PDGPRE200400	20" - 400 Grit Resin Polishing Pad
	PDGPRE210400	21" - 400 Grit Resin Polishing Pad

	Level-S™ 800 Grit - Diamond Impregnated Polishing Pad Uses: Intermediate or final step for new or previously unfinished hard floors which have gone through the grinding process. Intermediate or final step for restoration of a previously finished hard floor. For maintenance applications, use on hard floors to maintain initial gloss level. Surfaces: Concrete, Stone, Marble, Terrazzo & Quarry Tile Floors. Estimated Pad Life*: 10,000 ft2 (900 m2)
	Product Code	Product Description
	PDLP130800	13" - 800 Grit Diamond Impregnated Polishing Pad
	PDLP160800	16" - 800 Grit Diamond Impregnated Polishing Pad
	PDLP170800	17" - 800 Grit Diamond Impregnated Polishing Pad
	PDLP200800	20" - 800 Grit Diamond Impregnated Polishing Pad
	PDLP210800	21" - 800 Grit Diamond Impregnated Polishing Pad
	PDLP240800	24" - 800 Grit Diamond Impregnated Polishing Pad
	PDLP280800	28" - 800 Grit Diamond Impregnated Polishing Pad

	Level-S™ 1800 Grit - Diamond Impregnated Polishing Pad Uses: Intermediate or final step for new or previously unfinished hard floors which have gone through the grinding process. Intermediate or final step for restoration of a previously finished hard floor. For maintenance applications, use on hard floors to maintain initial gloss level. Surfaces: Stone, Marble, Terrazzo & Quarry Tile Floors. Estimated Pad Life*: 10,000 ft2 (900 m2)
	Product Code	Product Description
	PDLP131800	13" - 1800 Grit Diamond Impregnated Polishing Pad
	PDLP161800	16" - 1800 Grit Diamond Impregnated Polishing Pad
	PDLP171800	17" - 1800 Grit Diamond Impregnated Polishing Pad
	PDLP201800	20" - 1800 Grit Diamond Impregnated Polishing Pad
	PDLP211800	21" - 1800 Grit Diamond Impregnated Polishing Pad
	PDLP241800	24" - 1800 Grit Diamond Impregnated Polishing Pad
	PDLP281800	28" - 1800 Grit Diamond Impregnated Polishing Pad

	Level-S™ 3000 Grit - Diamond Impregnated Polishing Pad Uses: Final step for new or previously unfinished hard floors which have gone through the grinding process. Final step for restoration of a previously finished hard floor. For maintenance applications, use on hard floors to maintain initial gloss level. Surfaces: Stone, Marble, Terrazzo & Quarry Tile Floors. Estimated Pad Life*: 12,000 ft2 (1,100 m2)
	Product Code	Product Description
	PDLP133000	13" - 3000 Grit Diamond Impregnated Polishing Pad
	PDLP163000	16" - 3000 Grit Diamond Impregnated Polishing Pad
	PDLP173000	17" - 3000 Grit Diamond Impregnated Polishing Pad
	PDLP203000	20" - 3000 Grit Diamond Impregnated Polishing Pad
	PDLP213000	21" - 3000 Grit Diamond Impregnated Polishing Pad
	PDLP243000	24" - 3000 Grit Diamond Impregnated Polishing Pad
	PDLP283000	28" - 3000 Grit Diamond Impregnated Polishing Pad

	Level-S™ Fine Polish - Diamond Impregnated Polishing Pad Uses: Additional extremely fine polishing step for new or previously unfinished hard floors which have gone through the grinding process. Final step for restoration of a previously finished hard floor. For maintenance applications, use on hard floors to maintain initial gloss level. Surfaces: Stone, Marble, Terrazzo & Quarry Tile Floors. Estimated Pad Life*: 12,000 ft2 (1,100 m2)
	Product Code	Product Description
	PDLP13FP	13" - Fine Polish Diamond Impregnated Polishing Pad
	PDLP16FP	16" - Fine Polish Diamond Impregnated Polishing Pad
	PDLP17FP	17" - Fine Polish Diamond Impregnated Polishing Pad
	PDLP20FP	20" - Fine Polish Diamond Impregnated Polishing Pad
	PDLP21FP	21" - Fine Polish Diamond Impregnated Polishing Pad
	PDLP24FP	24" - Fine Polish Diamond Impregnated Polishing Pad
	PDLP28FP	28" - Fine Polish Diamond Impregnated Polishing Pad

Pad Reference Chart

* Estimated pad life assumes ideal conditions.
  Actual pad life may vary based upon the floor condition, amount of water used, operator performance, etc.

	PowerPolish™ Pads Ideal for high speed burnishing with propane burnisher. Long lasting abrasive pad designed specifically for concrete. Economical pad for floor surfaces treated with PowerStar® Top Shield. Estimated Pad Life*: 85,000 ft2 (7900 m2)
	Product Code	Product Description
	PDPPHS2100	21" PowerPolish™ Pad

	PowerPolish HT™ Pads Withstands heat build-up when curing PowerStar® Top Shield treated surfaces. Produces maximum gloss with high speed burnishing. Estimated Pad Life*: 150,000 ft2 (1390 m2)
	Product Code	Product Description
	PDPPHT2100	21" PowerPolish HT™ Pad

Pad Reference Chart

* Estimated pad life assumes ideal conditions.
  Actual pad life may vary based upon the floor condition, amount of water used, operator performance, etc.

	Blue Blend™ Pad Burnishes to a wet-look appearance especially on harder coatings. Very long lasting, even under extreme propane burnishing conditions.
	Product Code	Product Description
	PDBB06021	21" Blue Blend Pad

	Thermal Thunder™ Pad Combines the right amount of heat and friction with fiber content to smooth away scuffs and deep scratches for a brilliant wet-look shine. Performs best with 1500-2000 RPM burnishers.
	Product Code	Product Description
	PDTT01421	21" Thermal Thunder Pad

	White Lightning™ Pad Special polishing agents burnish brilliantly. Fine denier construction is gentle on softer coatings and will not leave hazing or streaking. Works excellent as a curing pad on fresh coating. Achieves best results with 1100-2000 RPM burnishers.
	Product Code	Product Description
	PDWL10021	21" White Lightning Pad

Up to 25,000 ft²/hr. (2300 m²/hr.)

Up to 11,000 ft²/hr. (1022 m²/hr.)

Propane

18 HP - 603 cc Kawasaki propane powered engine.

Polishing - 1000 RPM
Burnishing - 1500 RPM

21" (53 cm)

58 inches (148 cm)

22.75 inches (58 cm)

240 lb (109 kg)

< 89 db(A)

Less than 2.5 m/s²

75 lb (34 kg)

Amano Pioneer Eclipse, a worldwide provider of professional floor care solutions, introduces of the PE420GP - a propane powered floor grinder, polisher and burnisher. Designed for hard floor surfaces like concrete, marble and terrazzo, the PE420GP is the latest addition to the company’s long line of battery and propane powered floor care machines.

The PE420GP is three machines in one. As a grinder, it utilizes a 75 lb (34 kg) downward force, onboard 7-gallon (26 liter) water supply and aggressive diamond grinding pads to remove surface scratches and floor coatings. As a polisher, the machine operates at 1000 rpm and uses a variety of diamond polishing pads to smooth and shine the floor surface. As a burnisher, the PE420GP employs special high speed pads operating at 1500 rpm to cure floor surface treatments and hone the surface to a brilliant shine. Combining these functions into one unit lowers machine expenditures and reduces down time between operations.

“The PE420GP is a brand new design that targets building service contractors who maintain hard floor surfaces,” states Vic Thomas, Executive Director of Sales at Amano Pioneer Eclipse. “With this system, floor maintenance operations that used to require multi-person crews can be performed efficiently and effectively with only one operator.”

One of the many features of the PE420GP is the three position speed control. One position allows the engine to idle during warm up and maneuvering. The second throttle position is for polishing at 1000 rpm and the third position is for high speed burnishing at 1500 rpm. Without operator intervention, the throttle lock-out feature limits the machine to the lower settings. This prevents unneeded power during the polishing and grinding operations that typically occur at slower speeds.

“To optimize grinding, polishing and burnishing performance, the machine must maintain a specific pad speed,” says Derrick Hamm, Director of Research and Development at Amano Pioneer Eclipse. “The throttle design ensures the machine is set to produce the best results.”

The PE420GP also features an ergonomic safety clutch and finger tip water control for wet grinding operations. The PE420GP is the latest development from Amano Pioneer Eclipse - a worldwide machine and chemical manufacturer that provides simple floor care solutions for almost every type of floor surface. For more information on the PE420GP or any of Amano Pioneer Eclipse professional floor care products, please visit www.pioneer-eclipse.com. In the US call 1-800-367-3550. For international inquires; 1-336-372-8080.

The PE420GP is the answer to hard floor maintenance. This propane powered floor care machine grinds, polishes, and burnishes hard floor surfaces like concrete, marble, and terrazzo. Variable speed control (1000-1500 rpm), on board water supply, and a variety of diamond pads create an effective, efficient, and versatile system for professional building service contractors.

1. 12 volt on-board battery starter.
2. 7 gallon (26,5 liters) on board water supply.
3. Internal “above pad” water dosing system provides for even floor wetting and prevents wetting walls and merchandise.
4. Adjustable welded handle for improved comfort and control.
5. Eco-Sense™ emissions monitoring system.
6. American made all aluminum castings.
7. RokBak™ deck for easy pad installation.
8. Easy access filters for quick maintenance.
9. Ergonomic clutch and finger tip on/off water flow control.
10. Integral skirt protects surrounding merchandise.

PE420GP Grinder, polisher, burnisher.

To Qualify for this warranty:

1. Machine must be registered at the time of purchase on a form provided by Amano Pioneer Eclipse^® Corporation. Your Amano Pioneer Eclipse Distributor is responsible for the registration of your machine. Please cooperate with your Distributor in supplying necessary information on the card.
2. The machine must have been purchased from Amano Pioneer Eclipse or an authorized Amano Pioneer Eclipse Distributor.
3. This warranty extends to the original purchaser only and is not transferable to subsequent owners.

TIME PERIODS

1. Propane Engine warranted by engine manufacturer for (2) years.
2. Batteries warranted by battery manufacturer for (1) year.
3. Valve train warranted by Amano Pioneer Eclipse for (1) year.
4. ONE YEAR WARRANTY - For the model PE420GP.

Warranted to be free from defects in material and workmanship for a period of one year from the date of purchase by the original owners. (See Exclusions.)

EXCLUSIONS (Not Covered by Warranty)

1. Parts that fail through normal wear by reason of their characteristics (cords, pads, belts, wheels, or other consumable parts).
2. This warranty does not extend to parts affected by misuse, neglect, abuse or improper maintenance. All defective parts must be returned to the Distributor for credit.

THE OBLIGATION OF AMANO PIONEER ECLIPSE CORPORATION

1. The obligation of Amano Pioneer Eclipse under this warranty is limited to repairing or replacing, at its option, any part which is proven to be defective in material or workmanship under normal use for the applicable period stated above.



2. Warranty repairs will be made by your Amano Pioneer Eclipse Distributor without charge for parts and labor. They will be compensated with a warranty labor rate of $45.00 per hour.
3. Parts repaired or replaced under this warranty are warranted only during the balance of the original warranty period. All defective parts replaced under these warranties become the property of Amano Pioneer Eclipse.

WARRANTY SERVICE

To obtain warranty service, take your machine and proof of purchase to any authorized Amano Pioneer Eclipse Distributor. Amano Pioneer Eclipse will not reimburse expenses for service calls or travel. For the Distributor in your area, call Amano Pioneer Eclipse Customer Service Department at 800-367-3550 or 1-336-372-8080. If you are dissatisfied with the service that you receive, call or write Amano Pioneer Eclipse Customer Service Department for further assistance.

INSTRUCTIONS AND CONDITIONS FOR WARRANTY REIMBURSEMENT

• Order replacement part: Orders will be processed and charged, as normal procedure.
• Call APEC for R/A number.
• You will need the Engine Serial Number, Machine Serial Number, and the Machine Model Number.
• Parts must be returned, accompanied with the R/A number to be eligible for warranty credit.
• All Warranty Parts will be shipped prepaid UPS Ground, any other method will be at the recipients expense.
• Freight on any Warranty Part after 30 days must be paid for by the Purchaser.
• Warranty labor rate is 45.00 per hour.
• Credit will be issued upon completion of the above steps, at above rates.

DISCLAIMER OF CONSEQUENTIAL

AMANO PIONEER ECLIPSE DISCLAIMS ANY RESPONSIBILITY FOR LOSS OF USER TIME OF THE AMANO PIONEER ECLIPSE MACHINE OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGE EXCEPT AS STATED IN THE WARRANTY APPLICABLE TO EACH MACHINE. EXCEPT AS STATED IN SUCH WARRANTIES, THE COMPANY DOES NOT OTHERWISE WARRANT ANY MACHINE AND NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY IS MADE BY THE COMPANY.

Emission Control Warranty Statement

Your Warranty Rights and Obligations

The California Air Resources Board and Amano Pioneer Eclipse Corporation are pleased to explain the emissions control system’s warranty on your 2011 small off-road engine. In California, new equipment that uses small off-road engines must be designed, built, and equipped to meet the State’s stringent anti-smog standards. Amano Pioneer Eclipse Corporation must warrant the emissions control system on your small offroad engine for the period listed below provided there has been no abuse, neglect or improper maintenance of your equipment. Your emissions control system may include parts such as: carburetor's or fuel injection system, ignition system, catalytic converters, fuel tanks, valves, filters, clamps, connectors, and other associated components. Also included may be hoses, belts, connectors, sensors, and other emission related assemblies.

Where a warrantable condition exists, Amano Pioneer Eclipse Corporation will repair your small off-road engine at no cost to you including diagnosis, parts and labor.

Manufacturer’s Warranty Coverage

This emissions control system is warranted for two years. If any emissions-related part on your equipment is defective, the part will be repaired or replaced by Amano Pioneer Eclipse Corporation.

Owner’s Warranty Responsibilities

(a) As the small off-road engine owner, you are responsible for performance of the required maintenance listed in your owner’s manual. Amano Pioneer Eclipse Corporation recommends that you retain all receipts covering maintenance on your small off-road engine, but Amano Pioneer Eclipse Corporation cannot deny warranty solely for the lack of receipts or your failure to ensure the performance of all scheduled maintenance.

(b) As the small off-road engine owner, you should be aware that Amano Pioneer Eclipse Corporation may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, or improper maintenance or unapproved modifications.

(c) You are responsible for presenting your small off-road engine to an Amano Pioneer Eclipse Corporation distribution center or service center as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have a question regarding your warranty coverage, you should contact Amano Pioneer Eclipse Corporation at 1-800-367-3550.

Defects Warranty Requirements

(a) The warranty period begins on the date the engine or equipment is delivered to an ultimate purchaser.

(b) General Emissions Warranty Coverage. Amano Pioneer Eclipse Corporation as the manufacturer of each small off-road engine or equipment must warrant to the ultimate purchaser and each subsequent owner that the engine or equipment is:

(c) The warranty on emissions-related parts will be interpreted as follows:


(d) Emission Warranty Parts List

Amano Pioneer Eclipse Corporation will furnish with each new engine written instructions for the maintenance and use of the engine by the owner.

Exception: This warranty does not apply to any machine models that do not have a catalyst muffler.